Garage flooring made from polyaspartic

  • Multipurpose application – It can be applied in all weather conditions so there’s no need to wait for the right moment.
  • Durable – Polyaspartic is a hard-working material that can withstand high temperatures, but retains some flexibility. This allows for a scratch- and stain-resistant finish.
  • Style – This coating is similar to epoxy and allows for many customizations. You can create an individual look with color and chip additives.
  • Rapid drying – No more long waits! Polyaspartic can be applied in 30 minutes to an hours, so you can get back to your daily life and put your flooring down.
  • Air quality – You’ll breathe more easily with low VOCs, virtually no off-gassing odors, and you can take a deep breath.
  • Colorfast – Despite prolonged exposure to ultraviolet rays, the color will not fade or become yellow. This means that your garage will look great for longer.

The Cons of Polyaspartic Garage Flooring

  • Expensive – Polyaspartic coating has more benefits, but a higher price. When planning, it is important to consider your budget.
  • Battery acid weakness – Attention mechanics! Polyaspartic is stronger than epoxy, but it can’t withstand battery acid as well. This floor coating might not be right for you if you are expecting a lot of this.
  • Application tricky – Do-it-yourself application can be difficult as you need to spread the coating evenly with a squeegee/roller. It is best to hire a professional for installation.
  • Pot life is very short – The coating could dry on the floor or in a bucket before it is applied. This can trap bubbles or other imperfections and cause a lot more material to be wasted.
  • Possible delamination – The concrete in your garage may give off moisture. This could cause the polyaspartic to lose its bond and begin to peel from the floor.

The Showdown: Polyaspartic and Epoxy

Epoxy and primer in a commercial garage setting

Let’s now compare these two garage flooring options!


Although epoxy is extremely durable, it is still susceptible to abrasion. Polyaspartic is flexible and will not chip scratch, or scuff. It’s definitely more durable.



Polyaspartic is more expensive than Epoxy. Polyaspartic is more expensive than Epoxy. Add to that the cost of hiring an expert installer.


Drying Time

One layer of Polyaspartic takes approximately an hour to dry. Comparable to epoxy which takes approximately 16 hours to dry a single layer. Polyaspartic is the best choice if you are impatient.


DIY Installation

You can apply epoxy yourself using a roller brush. You can apply epoxy at a slower pace because it takes longer to dry. Polyaspartic is best applied with a squeegee, or roller. It dries quickly so there’s not much room for errors.

Winner Epoxy

Air Quality

Protective gear is required for epoxy application. Epoxy may cause a decrease in garage air quality. Polyaspartic is low in VOCs and emits a very faint off-gassing smell.

Winner Polyaspartic


Polyaspartic can be very slippery when it gets wet so it is a good idea for the surface to have chips to increase texture and traction. Epoxy is also a good option, although it isn’t as slippery.

Winner Epoxy

UV Stability

Exposure to UV radiation can cause epoxy products to yellow or fade over time. Make sure you check the product before purchasing. Polyaspartic has a colorfast formula that won’t fade or turn yellow.

Winner Polyaspartic

Which is better: Polyaspartic or Epoxy?

It’s easy to see why there is no way to definitively say which floor coating system is superior. Each of the epoxy and polyaspartic options have their own advantages and disadvantages. You can decide which one is best for you. You should now be able to compare installation methods and their pros and cons so you can decide what garage you need.



polaspartics outdoors


UV Resistant Weatherproof Outdoor Tough Flooring

Polyaspartic floor coatings are meant for heavy-traffic industrial and commercial flooring as well as residential garage floors. They have exceptional reliability, and they can also be installed speedily and conveniently. That is why this kind of floor coating system has captured the attention of many homeowners. Sometimes it is even considered for outdoor spaces, which is perfectly fine, although you have to note a few concerns to ensure an appropriate application.

In this article, we will discuss a few considerations you should consider when using polyaspartic coatings outdoors.


In general, polyaspartic coatings can be applied on various surfaces like one-day garage floors and institutions like schools and clinics. But despite this versatility, there are several types of environments where a polyaspartic coating would not be suitable. You should avoid using this type of coating in areas where a breathable concrete sealer is needed. Such applications typically include driveways or exterior stamped concrete. Remember that polyaspartic coatings are designed to provide protection. But when these are not used properly, the coatings’ surface may not breathe and preferably exhibit moisture challenges.

But polyaspartic coatings work quite well outdoors as well. Installers can dilute the coating to make it breathable and more suitable for outdoor spaces. This indicates that polyaspartic coating can be applied to thicknesses of less than six mils, enabling it to become absorbent and breathable.


It no longer comes as a surprise why polyaspartic coatings are also being considered for outdoor use. Their advantages are hard to ignore. Installation is quick and easy, and the quality of the material is long-lasting. Polyaspartic coatings don’t require much upkeep either. 

ArmorThane, one of the most well-known coating applicator companies globally, can deliver excellent results for garage floors, commercial kitchens, and bathrooms. ArmorThane utilizes high-quality materials and observes industry standards to ensure customer satisfaction. Call them or fill out their contact form to request a free quote.